IL Core Implementation Guide
0.18.0 - draft Israel flag

This page is part of the IL-Core IG (v0.18.0: draft-1 Draft) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: ILCoreMedicationDispense - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 1

Definitions for the il-core-medication-dispense resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MedicationDispense
Definition

Israel Core proposed constraints and extensions on the MedicationDispense resource profile.

ShortILCore MedicationDispense Profile
Invariantsil-medicationdispense-whenhandedover: whenHandedOver SHALL be present if the status is 'completed' (status='completed' implies whenHandedOver.exists())
2. MedicationDispense.extension
SlicingThis element introduces a set of slices on MedicationDispense.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. MedicationDispense.extension:recorded
    Slice Namerecorded
    Definition

    Extension: The time in whitch an event was recorded

    ShortExt: Recorded Time
    Control0..1
    TypeExtension(Ext: ILCore Recorded Time) (Extension Type: dateTime)
    6. MedicationDispense.partOf
    TypeReference(ILCore Procedure Profile)
    8. MedicationDispense.status
    Definition

    ILCore MedicationDispense Status

    ShortILCore MedicationDispense Status
    Must Supporttrue
    10. MedicationDispense.category
    BindingUnless not suitable, these codes SHALL be taken from ILCore Medication dispense Category
    (extensible to http://fhir.health.gov.il/ValueSet/il-core-medication-dospense-category)
    12. MedicationDispense.medication[x]
    BindingThe codes SHALL be taken from ILCore Medication Code
    (required to http://fhir.health.gov.il/ValueSet/il-core-medication-code)
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    SlicingThis element introduces a set of slices on MedicationDispense.medication[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 14. MedicationDispense.medication[x]:medicationReference
      Slice NamemedicationReference
      Control0..1
      TypeReference(ILCore Medication Profile)
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      16. MedicationDispense.subject
      Control1..?
      TypeReference(ILCore Patient Profile, ILCore Group Profile)
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      18. MedicationDispense.context
      TypeReference(ILCore Encounter Profile, ILCore EpisodeOfCare Profile)
      20. MedicationDispense.performer
      Must Supporttrue
      22. MedicationDispense.performer.actor
      TypeReference(ILCore Practitioner Profile, ILCore PractitionerRole Profile, ILCore Organization Profile, ILCore Patient Profile, ILCore Device Profile, ILCore RelatedPerson Profile)
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      24. MedicationDispense.location
      TypeReference(ILCore Location Profile)
      26. MedicationDispense.authorizingPrescription
      TypeReference(ILCore MedicationRequest Profile)
      Must Supporttrue
      28. MedicationDispense.type
      BindingUnless not suitable, these codes SHALL be taken from ActPharmacySupplyType
      (extensible to http://terminology.hl7.org/ValueSet/v3-ActPharmacySupplyType)
      Must Supporttrue
      30. MedicationDispense.quantity
      BindingUnless not suitable, these codes SHALL be taken from IL Core Units Of Measure Codes
      (extensible to http://fhir.health.gov.il/ValueSet/il-core-common-units-of-measure)
      Additional BindingsPurpose
      IL Core Units Of Measure CodesMax Binding
      Must Supporttrue
      32. MedicationDispense.whenHandedOver
      Must Supporttrue
      34. MedicationDispense.destination
      TypeReference(ILCore Location Profile)
      36. MedicationDispense.receiver
      TypeReference(ILCore Practitioner Profile, ILCore Patient Profile)
      38. MedicationDispense.dosageInstruction
      TypeDosage(ILCore Dosage Profile)
      Must Supporttrue
      40. MedicationDispense.substitution
      42. MedicationDispense.substitution.responsibleParty
      TypeReference(ILCore Practitioner Profile, ILCore PractitionerRole Profile)

      Guidance on how to interpret the contents of this table can be found here

      0. MedicationDispense
      Definition

      Israel Core proposed constraints and extensions on the MedicationDispense resource profile.


      Indicates that a medication product is to be or has been dispensed for a named person/patient. This includes a description of the medication product (supply) provided and the instructions for administering the medication. The medication dispense is the result of a pharmacy system responding to a medication order.

      ShortILCore MedicationDispense ProfileDispensing a medication to a named patient
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      mdd-1: whenHandedOver cannot be before whenPrepared (whenHandedOver.empty() or whenPrepared.empty() or whenHandedOver >= whenPrepared)
      il-medicationdispense-whenhandedover: whenHandedOver SHALL be present if the status is 'completed' (status='completed' implies whenHandedOver.exists())
      mdd-1: whenHandedOver cannot be before whenPrepared (whenHandedOver.empty() or whenPrepared.empty() or whenHandedOver >= whenPrepared)
      2. MedicationDispense.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. MedicationDispense.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on MedicationDispense.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. MedicationDispense.extension:recorded
        Slice Namerecorded
        Definition

        Extension: The time in whitch an event was recorded

        ShortExt: Recorded Time
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(Ext: ILCore Recorded Time) (Extension Type: dateTime)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        8. MedicationDispense.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        10. MedicationDispense.partOf
        Definition

        The procedure that trigger the dispense.

        ShortEvent that dispense is part of
        Control0..*
        TypeReference(ILCore Procedure Profile, Procedure)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. MedicationDispense.status
        Definition

        ILCore MedicationDispense Status


        A code specifying the state of the set of dispense events.

        ShortILCore MedicationDispense Statuspreparation | in-progress | cancelled | on-hold | completed | entered-in-error | stopped | declined | unknown
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from MedicationDispense Status Codeshttp://hl7.org/fhir/ValueSet/medicationdispense-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/medicationdispense-status|4.0.1)

        A coded concept specifying the state of the dispense event.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. MedicationDispense.category
        Definition

        Indicates the type of medication dispense (for example, where the medication is expected to be consumed or administered (i.e. inpatient or outpatient)).

        ShortType of medication dispense
        Comments

        The category can be used to include where the medication is expected to be consumed or other types of dispenses. Invariants can be used to bind to different value sets when profiling to bind.

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from ILCore Medication dispense Categoryhttp://hl7.org/fhir/ValueSet/medicationdispense-category
        (extensible to http://fhir.health.gov.il/ValueSet/il-core-medication-dospense-category)
        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. MedicationDispense.medication[x]
        Definition

        Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

        ShortWhat medication was supplied
        Comments

        If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

        Control1..1
        BindingThe codes SHALL be taken from For example codes, see ILCore Medication Codehttp://hl7.org/fhir/ValueSet/medication-codes
        (required to http://fhir.health.gov.il/ValueSet/il-core-medication-code)
        TypeChoice of: CodeableConcept, Reference(Medication)
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifierfalse
        Must Supporttrue
        Must Support TypesNo must-support rules about the choice of types/profiles
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on MedicationDispense.medication[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • type @ $this
        • 18. MedicationDispense.medication[x]:medicationReference
          Slice NamemedicationReference
          Definition

          Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

          ShortWhat medication was supplied
          Comments

          If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

          Control01..1
          TypeReference(ILCore Medication Profile, Medication), CodeableConcept
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          20. MedicationDispense.subject
          Definition

          A link to a resource representing the person or the group to whom the medication will be given.

          ShortWho the dispense is for
          Comments

          SubstanceAdministration->subject->Patient.

          Control10..1
          TypeReference(ILCore Patient Profile, ILCore Group Profile, Patient, Group)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          22. MedicationDispense.context
          Definition

          The encounter or episode of care that establishes the context for this event.

          ShortEncounter / Episode associated with event
          Control0..1
          TypeReference(ILCore Encounter Profile, ILCore EpisodeOfCare Profile, Encounter, EpisodeOfCare)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. MedicationDispense.performer
          Definition

          Indicates who or what performed the event.

          ShortWho performed event
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          26. MedicationDispense.performer.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          28. MedicationDispense.performer.actor
          Definition

          The device, practitioner, etc. who performed the action. It should be assumed that the actor is the dispenser of the medication.

          ShortIndividual who was performing
          Control1..1
          TypeReference(ILCore Practitioner Profile, ILCore PractitionerRole Profile, ILCore Organization Profile, ILCore Patient Profile, ILCore Device Profile, ILCore RelatedPerson Profile, Practitioner, PractitionerRole, Organization, Patient, Device, RelatedPerson)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesNo must-support rules about the choice of types/profiles
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. MedicationDispense.location
          Definition

          The principal physical location where the dispense was performed.

          ShortWhere the dispense occurred
          Control0..1
          TypeReference(ILCore Location Profile, Location)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          32. MedicationDispense.authorizingPrescription
          Definition

          Indicates the medication order that is being dispensed against.

          ShortMedication order that authorizes the dispense
          Comments

          Maps to basedOn in Event logical model.

          Control0..*
          TypeReference(ILCore MedicationRequest Profile, MedicationRequest)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. MedicationDispense.type
          Definition

          Indicates the type of dispensing event that is performed. For example, Trial Fill, Completion of Trial, Partial Fill, Emergency Fill, Samples, etc.

          ShortTrial fill, partial fill, emergency fill, etc.
          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from For example codes, see ActPharmacySupplyTypehttp://terminology.hl7.org/ValueSet/v3-ActPharmacySupplyType
          (extensible to http://terminology.hl7.org/ValueSet/v3-ActPharmacySupplyType)
          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. MedicationDispense.quantity
          Definition

          The amount of medication that has been dispensed. Includes unit of measure.

          ShortAmount dispensed
          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from For codes, see IL Core Units Of Measure Codes
          (extensible to http://fhir.health.gov.il/ValueSet/il-core-common-units-of-measure)
          Additional BindingsPurpose
          IL Core Units Of Measure CodesMax Binding
          TypeQuantity(SimpleQuantity)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. MedicationDispense.whenHandedOver
          Definition

          The time the dispensed product was provided to the patient or their representative.

          ShortWhen product was given out
          Control0..1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. MedicationDispense.destination
          Definition

          Identification of the facility/location where the medication was shipped to, as part of the dispense event.

          ShortWhere the medication was sent
          Control0..1
          TypeReference(ILCore Location Profile, Location)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. MedicationDispense.receiver
          Definition

          Identifies the person who picked up the medication. This will usually be a patient or their caregiver, but some cases exist where it can be a healthcare professional.

          ShortWho collected the medication
          Control0..*
          TypeReference(ILCore Practitioner Profile, ILCore Patient Profile, Patient, Practitioner)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. MedicationDispense.dosageInstruction
          Definition

          Indicates how the medication is/was taken or should be taken by the patient.


          Indicates how the medication is to be used by the patient.

          ShortHow the medication is/was taken or should be takenHow the medication is to be used by the patient or administered by the caregiver
          Comments

          When the dose or rate is intended to change over the entire administration period (e.g. Tapering dose prescriptions), multiple instances of dosage instructions will need to be supplied to convey the different doses/rates. The pharmacist reviews the medication order prior to dispense and updates the dosageInstruction based on the actual product being dispensed.

          Control0..*
          TypeDosage(ILCore Dosage Profile)
          Is Modifierfalse
          Must Supporttrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be found here

          0. MedicationDispense
          Definition

          Israel Core proposed constraints and extensions on the MedicationDispense resource profile.

          ShortILCore MedicationDispense Profile
          Control0..*
          Is Modifierfalse
          Summaryfalse
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          mdd-1: whenHandedOver cannot be before whenPrepared (whenHandedOver.empty() or whenPrepared.empty() or whenHandedOver >= whenPrepared)
          il-medicationdispense-whenhandedover: whenHandedOver SHALL be present if the status is 'completed' (status='completed' implies whenHandedOver.exists())
          2. MedicationDispense.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Summarytrue
          4. MedicationDispense.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. MedicationDispense.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. MedicationDispense.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages)

          A human language.

          Additional BindingsPurpose
          AllLanguagesMax Binding
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. MedicationDispense.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. MedicationDispense.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control0..*
          TypeResource
          Is Modifierfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. MedicationDispense.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on MedicationDispense.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. MedicationDispense.extension:recorded
            Slice Namerecorded
            Definition

            Extension: The time in whitch an event was recorded

            ShortExt: Recorded Time
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Ext: ILCore Recorded Time) (Extension Type: dateTime)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. MedicationDispense.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Summaryfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. MedicationDispense.identifier
            Definition

            Identifiers associated with this Medication Dispense that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

            ShortExternal identifier
            Comments

            This is a business identifier, not a resource identifier.

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. MedicationDispense.partOf
            Definition

            The procedure that trigger the dispense.

            ShortEvent that dispense is part of
            Control0..*
            TypeReference(ILCore Procedure Profile)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. MedicationDispense.status
            Definition

            ILCore MedicationDispense Status

            ShortILCore MedicationDispense Status
            Comments

            This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

            Control1..1
            BindingThe codes SHALL be taken from MedicationDispense Status Codes
            (required to http://hl7.org/fhir/ValueSet/medicationdispense-status|4.0.1)

            A coded concept specifying the state of the dispense event.

            Typecode
            Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            26. MedicationDispense.statusReason[x]
            Definition

            Indicates the reason why a dispense was not performed.

            ShortWhy a dispense was not performed
            Control0..1
            BindingFor example codes, see MedicationDispense Status Reason Codes
            (example to http://hl7.org/fhir/ValueSet/medicationdispense-status-reason)

            A code describing why a dispense was not performed.

            TypeChoice of: CodeableConcept, Reference(DetectedIssue)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            28. MedicationDispense.category
            Definition

            Indicates the type of medication dispense (for example, where the medication is expected to be consumed or administered (i.e. inpatient or outpatient)).

            ShortType of medication dispense
            Comments

            The category can be used to include where the medication is expected to be consumed or other types of dispenses. Invariants can be used to bind to different value sets when profiling to bind.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from ILCore Medication dispense Category
            (extensible to http://fhir.health.gov.il/ValueSet/il-core-medication-dospense-category)
            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. MedicationDispense.medication[x]
            Definition

            Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

            ShortWhat medication was supplied
            Comments

            If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

            Control1..1
            BindingThe codes SHALL be taken from ILCore Medication Code
            (required to http://fhir.health.gov.il/ValueSet/il-core-medication-code)
            TypeChoice of: CodeableConcept, Reference(Medication)
            [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
            Is Modifierfalse
            Must Supporttrue
            Must Support TypesNo must-support rules about the choice of types/profiles
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on MedicationDispense.medication[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • type @ $this
            • 32. MedicationDispense.medication[x]:medicationReference
              Slice NamemedicationReference
              Definition

              Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

              ShortWhat medication was supplied
              Comments

              If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

              Control0..1
              TypeReference(ILCore Medication Profile)
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. MedicationDispense.subject
              Definition

              A link to a resource representing the person or the group to whom the medication will be given.

              ShortWho the dispense is for
              Comments

              SubstanceAdministration->subject->Patient.

              Control1..1
              TypeReference(ILCore Patient Profile, ILCore Group Profile)
              Is Modifierfalse
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. MedicationDispense.context
              Definition

              The encounter or episode of care that establishes the context for this event.

              ShortEncounter / Episode associated with event
              Control0..1
              TypeReference(ILCore Encounter Profile, ILCore EpisodeOfCare Profile)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. MedicationDispense.supportingInformation
              Definition

              Additional information that supports the medication being dispensed.

              ShortInformation that supports the dispensing of the medication
              Control0..*
              TypeReference(Resource)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. MedicationDispense.performer
              Definition

              Indicates who or what performed the event.

              ShortWho performed event
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. MedicationDispense.performer.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              44. MedicationDispense.performer.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              46. MedicationDispense.performer.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              48. MedicationDispense.performer.function
              Definition

              Distinguishes the type of performer in the dispense. For example, date enterer, packager, final checker.

              ShortWho performed the dispense and what they did
              Control0..1
              BindingFor example codes, see MedicationDispense Performer Function Codes
              (example to http://hl7.org/fhir/ValueSet/medicationdispense-performer-function)

              A code describing the role an individual played in dispensing a medication.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              Allows disambiguation of the types of involvement of different performers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              50. MedicationDispense.performer.actor
              Definition

              The device, practitioner, etc. who performed the action. It should be assumed that the actor is the dispenser of the medication.

              ShortIndividual who was performing
              Control1..1
              TypeReference(ILCore Practitioner Profile, ILCore PractitionerRole Profile, ILCore Organization Profile, ILCore Patient Profile, ILCore Device Profile, ILCore RelatedPerson Profile)
              Is Modifierfalse
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. MedicationDispense.location
              Definition

              The principal physical location where the dispense was performed.

              ShortWhere the dispense occurred
              Control0..1
              TypeReference(ILCore Location Profile)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. MedicationDispense.authorizingPrescription
              Definition

              Indicates the medication order that is being dispensed against.

              ShortMedication order that authorizes the dispense
              Comments

              Maps to basedOn in Event logical model.

              Control0..*
              TypeReference(ILCore MedicationRequest Profile)
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. MedicationDispense.type
              Definition

              Indicates the type of dispensing event that is performed. For example, Trial Fill, Completion of Trial, Partial Fill, Emergency Fill, Samples, etc.

              ShortTrial fill, partial fill, emergency fill, etc.
              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from ActPharmacySupplyType
              (extensible to http://terminology.hl7.org/ValueSet/v3-ActPharmacySupplyType)
              TypeCodeableConcept
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. MedicationDispense.quantity
              Definition

              The amount of medication that has been dispensed. Includes unit of measure.

              ShortAmount dispensed
              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from IL Core Units Of Measure Codes
              (extensible to http://fhir.health.gov.il/ValueSet/il-core-common-units-of-measure)
              Additional BindingsPurpose
              IL Core Units Of Measure CodesMax Binding
              TypeQuantity(SimpleQuantity)
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. MedicationDispense.daysSupply
              Definition

              The amount of medication expressed as a timing amount.

              ShortAmount of medication expressed as a timing amount
              Control0..1
              TypeQuantity(SimpleQuantity)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. MedicationDispense.whenPrepared
              Definition

              The time when the dispensed product was packaged and reviewed.

              ShortWhen product was packaged and reviewed
              Control0..1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              64. MedicationDispense.whenHandedOver
              Definition

              The time the dispensed product was provided to the patient or their representative.

              ShortWhen product was given out
              Control0..1
              TypedateTime
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              66. MedicationDispense.destination
              Definition

              Identification of the facility/location where the medication was shipped to, as part of the dispense event.

              ShortWhere the medication was sent
              Control0..1
              TypeReference(ILCore Location Profile)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              68. MedicationDispense.receiver
              Definition

              Identifies the person who picked up the medication. This will usually be a patient or their caregiver, but some cases exist where it can be a healthcare professional.

              ShortWho collected the medication
              Control0..*
              TypeReference(ILCore Practitioner Profile, ILCore Patient Profile)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. MedicationDispense.note
              Definition

              Extra information about the dispense that could not be conveyed in the other attributes.

              ShortInformation about the dispense
              Control0..*
              TypeAnnotation
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. MedicationDispense.dosageInstruction
              Definition

              Indicates how the medication is/was taken or should be taken by the patient.

              ShortHow the medication is/was taken or should be taken
              Comments

              When the dose or rate is intended to change over the entire administration period (e.g. Tapering dose prescriptions), multiple instances of dosage instructions will need to be supplied to convey the different doses/rates. The pharmacist reviews the medication order prior to dispense and updates the dosageInstruction based on the actual product being dispensed.

              Control0..*
              TypeDosage(ILCore Dosage Profile)
              Is Modifierfalse
              Must Supporttrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. MedicationDispense.substitution
              Definition

              Indicates whether or not substitution was made as part of the dispense. In some cases, substitution will be expected but does not happen, in other cases substitution is not expected but does happen. This block explains what substitution did or did not happen and why. If nothing is specified, substitution was not done.

              ShortWhether a substitution was performed on the dispense
              Control0..1
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. MedicationDispense.substitution.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              78. MedicationDispense.substitution.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              80. MedicationDispense.substitution.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              82. MedicationDispense.substitution.wasSubstituted
              Definition

              True if the dispenser dispensed a different drug or product from what was prescribed.

              ShortWhether a substitution was or was not performed on the dispense
              Control1..1
              Typeboolean
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              84. MedicationDispense.substitution.type
              Definition

              A code signifying whether a different drug was dispensed from what was prescribed.

              ShortCode signifying whether a different drug was dispensed from what was prescribed
              Control0..1
              BindingFor example codes, see ActSubstanceAdminSubstitutionCode
              (example to http://terminology.hl7.org/ValueSet/v3-ActSubstanceAdminSubstitutionCode)

              A coded concept describing whether a different medicinal product may be dispensed other than the product as specified exactly in the prescription.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              86. MedicationDispense.substitution.reason
              Definition

              Indicates the reason for the substitution (or lack of substitution) from what was prescribed.

              ShortWhy was substitution made
              Control0..*
              BindingFor example codes, see SubstanceAdminSubstitutionReason
              (example to http://terminology.hl7.org/ValueSet/v3-SubstanceAdminSubstitutionReason)

              A coded concept describing the reason that a different medication should (or should not) be substituted from what was prescribed.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              88. MedicationDispense.substitution.responsibleParty
              Definition

              The person or organization that has primary responsibility for the substitution.

              ShortWho is responsible for the substitution
              Control0..*
              TypeReference(ILCore Practitioner Profile, ILCore PractitionerRole Profile)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. MedicationDispense.detectedIssue
              Definition

              Indicates an actual or potential clinical issue with or between one or more active or proposed clinical actions for a patient; e.g. drug-drug interaction, duplicate therapy, dosage alert etc.

              ShortClinical issue with action
              Comments

              This element can include a detected issue that has been identified either by a decision support system or by a clinician and may include information on the steps that were taken to address the issue.

              Control0..*
              TypeReference(DetectedIssue)
              Is Modifierfalse
              Summaryfalse
              Alternate NamesContraindication, Drug Utilization Review (DUR), Alert
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. MedicationDispense.eventHistory
              Definition

              A summary of the events of interest that have occurred, such as when the dispense was verified.

              ShortA list of relevant lifecycle events
              Comments

              This might not include provenances for all versions of the request – only those deemed “relevant” or important. This SHALL NOT include the Provenance associated with this current version of the resource. (If that provenance is deemed to be a “relevant” change, it will need to be added as part of a later update. Until then, it can be queried directly as the Provenance that points to this version using _revinclude All Provenances should have some historical version of this Request as their subject.).

              Control0..*
              TypeReference(Provenance)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))